Understanding the behavior of tiny droplets in our cells could aid the search for new treatments. A team of Leiden ...
Abstract: This article presents a portable optical fiber sensor (OFS) design for continuous liquid level measurement, fabricated using two pieces of bare polymer optical fibers (POFs). The proposed ...
This study demonstrates the application of ICT in healthcare by developing a smart diaper sensor. A uni-electrode self-capacitance sensor was implemented to measure moisture levels in diapers by ...
Nature Research Intelligence Topics enable transformational understanding and discovery in research by categorising any document into meaningful, accessible topics. Read this blog to understand ...
This is the material for an intermediate-level MOSFET circuit design course, held at JKU under course number 336.009 ("KV Analoge Schaltungstechnik"). Follow this link to access the material.
Ionic liquid-based ITLs are actively researched for wearable sensor applications due to high ion conductivity and high environmental and electrochemical stability (Li et al., 2019). Notably, their ...
Therefore, it is necessary to provide an overview of the current technological level and future development of flexible tactile sensors to ease and expedite their deployment and to make the critical ...
Connect a 4k7 kΩ pull-up resistor between the 1-Wire data line and 5V power. Note this applies to the Arduino platform, for ESP32 and 8266 you'll need to adjust the resistor value accordingly. For ...
Fig(13) shows the circuit configuration of this topology, we can note that adding capacitor at input will lead to decrease in the unity gain frequency, that will lead to an increase in noise figure of ...
Inter integrated circuits (I2C) is a multi-master, low-bandwidth, short distance, serial communication protocol. Because of its simplicity and flexibility, I2C and its derivatives are widely employed ...