As I've experimented and played with a lot of different sensors, I've discovered that these basic devices can be built for ...

I’ve tried the DHT11 sensor modules at both Vcc 3.3V and 5.0V, and at both voltages the humidity values are bad. dfrobot has introduced a V2 DHT11 sensor module that changes the 10K pull-up to 4.7K.

In addition to the NodeMCU board, [Shyam] adds a DHT11 sensor and SSD1306 OLED display. He’s provided a wiring diagram in the repository along with the Arduino code for the ESP8266, ...

To build your very own IoT rain checking system, you will need a Raspberry Pi 3 Model B, a DHT11 Temperature & Humidity Sensor (4 pins), and a raindrop sensing board, which can be purchased for ...

S ummer break is the perfect time to turn curiosity into hands-on learning, especially with a Raspberry Pi in the mix.

First, we need a DHT11 sensor, and to check whether it works using one micro:bit. To do this, we must teach the MakeCode editor new tricks. Go to “Extensions”, type in “DHT11” and click on ...

The project is equipped with a DHT11 sensor to read the room's temperature and an LCD to display this temperature reading and the speed the motor is currently running at.