No, you should turn off the water before replacing a toilet fill valve. To do this, rotate the shutoff valve clockwise. This valve is usually located on the wall behind the toilet or on the floor.

As the water begins filling the toilet’s tank, check for leaks around the new valve. If there is a leak, shut off the water, ...

How to Repair a Running Toilet 1. Adjust the Float. The float arm controls the water level in your tank. If it’s set too high, water will keep running into the overflow tube.

The toilet is running because either water is running in the toilet or water is running out. You need to replace the fill valve and/or the flapper. VIEW E-EDITION. 25¢ for 3 mos.

If you have an older toilet, then you may not have a built-in shut-off valve. Shutting off the main water supply valve will cut water to everything in your house: sinks, showers, washing machines ...

You’re about to use the toilet but notice it has unusually low water. Or even worse, you just used and flushed your toilet only to find the water barely fills up the bowl. At this point, there ...

Locate the water shutoff valve behind your toilet (connected to the wall) and turn the lever so it’s pointing 90 degrees away from the hose. Flush the toilet to empty the water, ...

Save water—and your sanity—by learning how to fix a running toilet in no time. An easy home repair could be as simple as getting a new flapper chain or adjusting the water level ...